Tag
#fdm
7 posts tagged fdm.
- guides
Do You Need a 3D Printer Enclosure? And DIY vs Bought
When an enclosure is genuinely required (ABS and ASA), when it's optional, when it hurts, and how a DIY enclosure compares to a commercial one for FDM printing.
- troubleshooting
Bed Adhesion Troubleshooting: Warping, First Layers, and What Actually Works
A systematic guide to fixing bed adhesion problems on FDM printers — diagnosing warping versus first-layer failure, and the adhesion methods worth using
- troubleshooting
Stringing and Oozing: Causes and How to Tune Retraction
Why FDM prints come out covered in fine strings — and a methodical approach to fixing it through temperature, retraction distance and speed, travel moves
- tutorials
Temperature Towers and Flow Calibration: Dialing In a New Filament
How to find the right print temperature with a temperature tower and then calibrate flow rate, so every new spool prints cleanly without guesswork.
- maintenance
FDM Printer Maintenance: The Routine That Prevents Most Problems
A maintenance schedule for FDM 3D printers — what to do weekly, monthly, and quarterly. The fixes that prevent 90% of mid-print failures.
- reviews
Best FDM Printers 2026: Top 3D Printer Picks by Tier
Best FDM printers 2026: top 3D printer picks by price tier, from best overall and budget to large-format, speed, and enclosed, plus what to look for.
- tutorials
First Layer Calibration: OrcaSlicer & Z-Offset Guide
First layer calibration, step by step: set z-offset, level the bed, and tune flow in OrcaSlicer or any FDM printer to fix adhesion and squish issues.